Aga manual high fire

Your oil fired Aga range cooker has a high and low fire oil flow rate. The cooker senses heat loss, via the thermostat, and moves the oil flow to high fire rate until the target temperature is reached. High low fire oil flow rates for Aga range cookers Low fire rate = 4cc per minute (1 cc = 1 millilitre) High. After Your AGA gas has been Erected. When first lit, your Aga will emit an odour for a short while. Do not worry, this is simply due to protective oil burning off the hotplates. If you can wipe the inside of the hotplate lids whilst the AGA is heating up it will avoid a film of this oil being deposited on the inside of the lids. Also. failure, the burner can be switched to ‘High Fire’ by simply moving the manual high fire lever on the top of the control box Fig. 4 from RIGHT to LEFT and engaging it back in the slot in the cover. The lever should be returned to its normal position when cooking is File Size: KB.

AGA Freestanding Stoves are brought to you by the manufacturers of the world famous AGA range cooker. The range encompasses both classic and contemporary styles and are manufactured in either cast-iron or steel. Selected models are now available in all fuel types from wood and solid fuel to gas and electric. be fitted with a remote acting fire valve (such as a Teddington KBB°C) located outside the building, or where the supply enters the wall on the inside of the building and with the heat sensing phial of the fire valve, located as near as practicable on the valve side of the cooker. A micron oil filter should also be fitted in the oil line. High and Low Fire Rates for Oil Aga Range Cookers Your oil fired Aga range cooker has a high and low fire oil flow rate. The cooker senses heat loss, via the thermostat, and moves the oil flow to high fire rate until the target temperature is reached.

www.doorway.ru If the information in this manual is not followed exactly, a fire or this range the low position is beyond high, not between. If the information in these instructions is not followed exactly, a fire or Push and turn burner control knob to the high position. See also the ZR electric top instructions. Adjustment of the HIGH fire rate. (See picture 5). The combustion must not cause soot or rumbling.